Acriplast Super
ACRIPLAST Super is an elastic continuous mono-component membrane with a base of solvent phase acrylic resins.
ACRIPLAST Super is excellent for waterproofing of: building coverages, old bituminous supports, foundation walls, eaves, mouldings, concrete terraces, fireplaces, roofings, walls, façades, flower-boxes and hanging gardens, CLS tubs created to contain non aggressive and not drinkable waters .
Ask for information Visualize certificate
CHARACTERISTICS:
- Impermeability to the water.
- Flexibility to cold up to -45 °s C
- ultraviolet rays resistant.
- Elasticity.
- Adaptability to any geometry surface.
- Facility of laying.
- Stability of coloration as time goes by.
- Resistance to industrial atmospheres's aggressions .
APPLICATION:
Don't apply on damp or wet surfaces. Verification must be effected at environmental temperature superior to + 5 °C
Cement Supports : clean ro eliminate dust, non-adherent friable parts, greasy, oils and everything bad for adhesion. Support has to be dry before application.
Bitumen-polymer membranes support : clean and remove protective varnishes in separation phase , damged parts remaking .
Metallic supports: clean and eliminate dust, greasy, oils and everything could damage adhesion; mechanically remove rust and apply rust-converter RUGINOX.
Verify product's homogeneity before applying it. Don't apply on damp or wet surfaces. Verification must be effected at environmental temperature superior to + 5 °C. this product is inflammable. No problems in normal maintenance interventions . Glut of surface's porosity through application of ACRIPLAST Super diluted with nitro thinner at the rate of 60/40. so prepared primer must be applied at the rate of 200-250 gr. / m. Apply ACRIPLAST Super giving 2 coats with contrast of color, single layer of 0.8 /1.0 kg/mq.
It can be applied using brush, airless, roller.
INFORMATION ON THE PRODUCT
VALUE
UNITED' OF MEASURE
Specific weight
1,32 (± 0,05)
Kg/lit
Dry residue in weight
67 (± 2%)
%
Desiccation to 23 °Cs (± 3 °Cs)
24
hours
Traction resistance Ø 1 mm
7,2
Kg/cm²
Traction extension
475
%
Flexibility to cold
-45
°C
Impermeability to the water
500 (any loss)
KPa
minimun consume
2
Kg/mq
Time of overlap with itself
Min. 12
hours
Ask for information
|
